Oil Mist Generation

Concept’s OMG is used by many of the worlds leading specialists in Oil Mist Detection including Specs, Dr Horn , Honeywell, Kidde, Valcom, Daihatsu, Schaller and Kwangsan.

Principles of Operation

The oil mist media is stored in the OMG in a heated pressure tank, the temperature of which can be controlled to ensure a consistent and appropriate oil viscosity. Temperature control of the reservoir is via it's own PID microprocessor controller, allowing independent control from ambient to 70°C.

The heat exchanger within the OMG is controlled by a second programmable microprocessor controller, the parameters of which can be adjusted to suit the specific physical properties of the oil in question. The high watt density cartridge heaters within the heat exchanger are controlled via a solid state relay, which proportionally bursts power to the heat exchanger to maintain optimum response time with minimum overshoot.

Oil mist can be produced above a minimum temperature alarm value, which can also be adjusted to suit the physical properties of the test oil. Once this state is achieved, oil mist is produced by pressurising the integral oil tank with an inert carrier gas.

A mixture of oil and inert gas is then passed through the precision, machine heat exchanger chamber. The oil is vapourised, and the resulting vapour condenses on exiting the heat exchanger to form a dense, controllable oil mist / fog.

Safety

Concept Smoke Oil mist has been extensively tested by independent bodies, including the Health and Safety Executive to ensure that it is non toxic and non flammable, Copies of the Health and Safety Data Pack are available on request. However, risk assessments should be carried out prior to the use of other "oils types" through the OMG.

Supplied with:

• 2 litres Smoke Fluid A-OGC
• 5 metre Remote Control
• Operating instructions and service kit

Want more information, advice or prices? email us: info@conceptsmoke.com